Learn More About Bathroom Sinks from Our Plumber in Corona, CA

Your bathroom sink is composed of several different parts, all of which can break, leak, or clog. When you are having a problem with your sink, it is important to know how all of the parts function so you can figure out if the issue is something you can fix at home, or if it is time to call a plumber in Corona, CA. Here is a guide to your bathroom sink’s plumbing system.

Shut-Off Valve – Each fixture in your home has its own shut-off valve so that you don’t need to disconnect water to the entire house when you need to make a repair. Before attempting to do anything with the sink, you should switch off the valve so that no water is coming through the sink. Different types of shut off valves are used depending on the kind of plumbing you have.

Water Supply Lines – Your water supply line is connected to the shut-off valve and carries water to the faucet. You should check the supply lines for leaks on a regular basis, and you should also replace your supply lines when you replace the faucet. You may want to have your plumber in Corona, CA, perform this task to ensure it is connected properly.

Pop-up Drain – The pop-up drain is the feature that moves the stopper in your sink up and down. The pop-up drain consists of a tailpiece and a horizontal rod. When clearing a blockage, you should remove this first, so you can pull out the stopper.

P-Trap – A P-trap is a section of pipe consisting of a U-bend and a trap arm. This is so that sewer gas smells don’t back up into your home. Homeowners with little experience tend to install P-traps backward, so make sure you consult your plumber for assistance.

Drain Pipe – The drain pipe is the section that goes out through the floor or wall and connects to your main drain pipe. This is usually where a drain snake is inserted once it is determined that the blockage is not in another section of the pipe.

When you need a capable plumber in Corona, CA, to fix your bathroom sink, contact Professional Plumbing, Inc.